WIZ Ethernet Library for Arduino IDE 1.5.7

WIZ_Ethernet_Lib_IDE1.5.7.git

The Ethernet library lets you connect to the Internet or a local network.

Supported devices

  • ioShield, WIZ550io (used in W5500)
  • W5200 Ethernet Shield, WIZ820io (used in W5200)
  • Ethernet Shield (used in W5100)

Hardware

Software

Install WIZ Ethernet library

Download all files and overwrite onto the”Arduino\libraries\Ethernet” folder in your project in sketch.
– Ethernet folder has two folers, examples and src folers.

Select device(shield)

Uncomment device(shiel) you want to use.

//ArduinolibrariesEthernetutilityw5100.h
#ifndef W5100_H_INCLUDED
#define W5100_H_INCLUDED

#include <avr/pgmspace.h>
#include

typedef uint8_t SOCKET;
//#define W5100_ETHERNET_SHIELD
//#define W5200_ETHERNET_SHIELD
#define W5500_ETHERNET_SHIELD

Using the WIZ Ethernet library and evaluate existing Ethernet example.

All other steps are the same as the steps from the Arduino Ethernet Shield.
You can use examples in ./Ethernet/examples folder for the Arduino IDE 1.5.7, go to Files->Examples->Ethernet, open any example, then copy it to your sketch file and change configuration values properly.
After that, you can check if it is work well. For example, if you choose ‘WebServer’, you should change IP Address first and compile and download it. Then you can access web server page through your web browser of your PC or something.

Revision History

Initial Release : 15 Jul. 2014

Advertisements