Video: Atmel showcases the WINC1500 wireless module at ARM TechCon

  • WINC1500 wireless module
    *The Arduino Wi-Fi Shield 101 is powered by Atmel’s wireless network controller, part of the Atmel SmartConnect family. It also includes the ATECC108 device, from the CryptoAuthentication family, which allows users to easily incorporate hardware authentication capability in their design.

Atmel | Bits & Pieces

Back in September, Atmel expanded its leading SmartConnect wireless portfolio with four new turnkey system-on-chips (SoCs), including the WINC1500. The recently-unveiled WINC1500 is an IEEE 802.11b/g/n network controller optimized for battery-powered Internet of Things (IoT) applications.

atmel_winc1500_fb_tc_1200x1200_091714

The WINC1500 is an ideal add-on to existing MCU solutions bringing Wi-Fi and network capabilities through UART or SPI-to-WiFi interface, and connects to any Atmel AVR or Atmel  | SMART MCU with minimal resource requirements. As a result, the SoC enables Makers and engineers to bring connectivity to any embedded design, ranging from consumer to industrial apps.

As Hackaday’s Adam Fabio recently noted, “The WINC1500 is a nifty little Wi-Fi module in its own right… 72Mbps may not sound like much by today’s standards, but it’s plenty fast for most embedded applications. WINC handles all the heavy lifting of the wireless connection.”

The WINC1500’s most advanced mode is a single stream 1×1 802.11n mode…

View original post 285 more words

Advertisements